|
Current range
|
25 mA to 100mA
|
|
Voltage range
|
+-1V to +-10V (bipolar)
|
|
Power
|
up to 2 W (for one channel)
|
|
Measurement resolution
|
0.003% (16Bit)
|
|
Measurement accuracy
|
0.05%
|
|
Measurement method
|
synchronic measurement of voltage, current and aux channel
|
|
Input resistance (for voltage measurement)
|
> 1 GW
|
|
Controlable values
|
Current, voltage: Analogue control
Power, resistance: Digital control
combinations: Digital control
|
|
Calculated values
|
Power, charge, energy, deviations, others
|
|
Additional input channels
(optional)
|
On board up to four for each test channel (i.e. Pt 100, NTC or voltage input (100 mV to 60 V).
Further input channels are possible by use of additional input boards.
|
|
Control input and output
|
Up to seven digital input/output per channel on board
Up to eight relais outputs per channel (with additional relays board)
|
|
Rise time
|
< 100 ms
|
|
Minimum pulse duration
|
shorter than 450 ms, time resolution: 160 ns
|
|
Interface
|
RS 232 and ethernet
|
|
Software control
|
Basytec protocol, see BaSyTest Software
|
|
Other options
|
- Additional analogue inputs
- Battery holders
- Calibration device
- Control of external charger / load
- Communication with battery management systems
as smart battery system.
- Interface for other power amplifiers
- climate chambers
|
